Speakers tend to produce electromagnetic waves which can harshly
impact system components like hard drives, picture tube in a monitor, and even
the graphics card. If your speakers are placed around your computer or you have
a surround sound system, then the potential risk of damaging your computer
components increases.
So it becomes quite a necessity to install some insulation or a
barrier on your speakers to stop any electromagnetic fields. You can refer to
some of the tips
and tricks mentioned below to shield your speakers and avoid any
electromagnetic field.
Check for obstructions
Before planning to install the shield on your speakers check
thoroughly if there is any shielding present on the speakers as many new home
theaters and surround sound speakers have shield preinstalled on them. It is
best suited to refer to the user manual of your speaker as such specific
details are generally available inside user guides.
Use electromagnetic field detector
User can also use electromagnetic field detector to ascertain if
their speakers emit electromagnetic waves. Although these detecting devices are
quite expensive and require a professional to use properly. But to be sure you
don’t have to shield the wires of your speaker as they do not emit any such
harmful waves.
Place it away from vulnerable
devices
A simple yet effective tip to avoid any damage to your vulnerable
devices is to place your speakers at an approx distance of 3 feet from any
device or hardware as the impact of the electromagnetic waves starts to diminish
beyond the 2-3 feet distance. In other words, three feet distance is considered
to be a safe distance for many electronic products from the electromagnetic
waves.
Add a metal cap
Users can even choose to apply a metal cap on the speaker to
create a barrier for the electromagnetic waves. To do so, first, they will have
to remove the back panel of their speaker cabinet and look for the magnet,
which is a donut-shaped object placed at the back of the speaker.
Measure the magnet
Then use a measuring tape to note the size of the magnet
correctly. It is essential to accurately measure the magnet as it would be
crucial in choosing an appropriate shield for your speaker.
Get the right shield
Purchase the correct size of the shield after taking measurements.
It is best to opt for readily available materials like steel items, or caps of
small air ducts or a user can purchase specific products which are certified
for stopping electromagnetic waves.
Secure the shield
Now place the shield in the place and properly secure it. It is
best to use a glue gun to secure the barrier on the magnet properly. Hopefully,
you will easily be able to apply a shield for your speaker and secure all your
hardware from any potential damage from electromagnetic waves.
Anna
Mathew, writer of this
blog loves to write and create awareness related to day-to-day internet
threats. Major topics of her interest are Printer support like Canon,
Brother, Lexmark
Printer Support and HP
printer support etc.
No comments:
Post a Comment